Foundation Repair Methods for Houston Clay Soil: Piers, Pilings and Leveling
How pressed pilings, drilled piers, steel and helical piers, mudjacking and foam compare on Houston's clay, and how the right method gets chosen.
By the Texas Greatest Remodelers team
Updated November 9, 2026

The right foundation repair method depends on what is moving your house. In Houston's expansive clay, the top layer of soil swells and shrinks with the weather, so repairs that sit in that layer can move with it. Piers and pilings aim to carry the house on soil below it. Leveling then lifts the house back toward level on those new supports.
Key takeaways
- Houston's clay swells when wet and shrinks when dry. The layer that moves is called the active zone, and its depth varies from site to site.
- Deep supports (pressed concrete pilings, drilled piers, steel pipe piles, helical piers) all try to reach soil below the active zone. Mudjacking and foam injection are shallow lifts that sit in the moving soil.
- Stabilizing and leveling are two different jobs. Ask every bidder how they will do both, and how they will know the supports went deep enough.
- Measure before anyone quotes: a floor elevation map shows where the slab dropped and by how much. Test the plumbing too, since leaks can drive movement.
- Most Texas homeowners policies do not cover earth movement. Read your policy before you file.
Why Houston's clay decides the method
Houston sits on "Gumbo Clay," an expansive soil that swells like a sponge when wet and shrinks when dry. That constant movement cracks slabs and walls, sticks doors and tilts floors.
Engineers call the depth of soil whose moisture changes with the seasons the active zone. Texas A&M University's geotechnical research consortium found that the depth of the active zone is a critical factor in predicting movement, with no widely accepted method yet to estimate it. That is why foundation repair is decided house by house, not from a price sheet.
The Foundation Performance Association, a Houston group of foundation repair contractors and consultants, makes the same point about Houston repairs: most foundation movement in southeast Texas comes from changes in the moisture content of expansive soils, and the goal of a deep repair is support below the active zone to minimize future movement.
Stabilizing vs leveling: two different jobs
A foundation repair usually does two things:
- Stabilize. Add supports that carry the foundation on soil that moves less.
- Level. Lift the low areas back toward their original position, then re-support them at that height.
They are not the same. A lift with no deep support can settle again. A deep support with no lift leaves the floor where it is. The engineering guidelines published by the Texas Section of the American Society of Civil Engineers (ASCE) also note that it is unlikely an elevation adjustment will result in a level foundation, so "back toward level" is the honest goal.
Foundation repair methods you will see on Houston bids
Here is how the common methods work, based on the Foundation Performance Association's descriptions. Texas Greatest Remodelers repairs slab homes with pressed concrete pilings and repairs pier-and-beam homes from underneath. The other methods are ones you may see on other contractors' bids.
Pressed concrete pilings
Precast concrete sections are stacked and pressed into the ground, using the weight of the house as resistance, until the piling stops going down and the structure begins to rise. Most of the support comes from friction along the sides of the piling, with some from the soil compressed under its base. The aim is to reach below the active zone.
This is the method Texas Greatest Remodelers uses on slab homes. We drive concrete pilings with hydraulic pressure past the shifting clay and stop only when we hit the "Depth of Refusal," the solid, load-bearing soil that won't move. You see where every piling goes before we start.
Drilled piers
A hole is drilled, steel reinforcement is placed and concrete is poured in place. The shaft can be straight or have a widened base, called a bell. Most of the support comes from the bottom of the pier. Like pilings, drilled piers are meant to reach below the active zone, and a pier that is too shallow can move with the seasons.
Steel pipe piles
Steel pipe sections are pressed into the ground one on top of another, again using the weight of the house, until the needed resistance is met or they reach rock or other load-capable soil. Support comes mostly from friction along the pipe unless the pile bears on a firm layer.
Helical piers
A steel shaft with helix-shaped plates is screwed into the soil by hydraulic equipment until it reaches the torque that gives the needed capacity. A bracket then transfers the weight of the house to the pier.
Mudjacking and foam injection
Mudjacking pumps a cement slurry under the slab to lift it. Foam injection does the same with an expanding urethane foam, and the slab then sits on the foam. The Foundation Performance Association describes both as shallow repairs affected by the active, moving soil: if the soil moisture changes, the slab can move again. The ASCE guidelines describe grouting and mudjacking as working either on shallow footings or on top of deep piles or piers, so they can be paired with deep supports rather than used on their own.
Pier-and-beam repairs
Pier-and-beam homes have a raised floor on posts or piers. Repairs can include shimming the floor framing, repairing or reinforcing damaged framing, and adding supports where spans are too long. On pier-and-beam homes, our crews can often work from underneath, replacing or reinforcing failed posts, deteriorated components or sagging beams, then releveling the floors.
What no repair method can promise
Two limits apply to every method, and a good contractor will explain them.
- Piers do not stop the soil from swelling. The Foundation Performance Association notes that the repair piers and pilings most commonly used on Houston homes are not tied to the grade beams, so they cannot prevent the foundation from rising if the soil heaves.
- Supports only help where they are placed. The ASCE guidelines say underpinning will not improve the performance of the foundation in areas that were not underpinned.
Both sources also stress moisture control. Poor drainage, trees close to the slab and leaking sewer or water lines can keep moving the soil under a repaired foundation. Direct downspouts and surface water away from the house after any repair.
How the right method gets chosen
Measure first. A floor elevation survey shows where the slab dropped and by how much. The ASCE guidelines add that a single survey is a snapshot of one moment and should not be the only basis for a decision, so cracks, door fit and the history of the house belong in the picture too.
Check the plumbing. A leaking sewer or water line under a slab can change the moisture in the soil, and lifting a house can stress old pipes. The ASCE guidelines call for water supply and drain lines to be tested for leaks after any lift.
Match the method to the house. Slab or pier-and-beam, how far it has moved, where the movement is and how the crew can reach those spots all shape the plan. If bids disagree, an independent evaluation by a licensed engineer can settle it. You can check that an engineer holds a Texas license on the Texas Board of Professional Engineers and Land Surveyors roster.
For warning signs to watch after a storm, see our guide to foundation leveling after heavy rain in Houston. For what moves the price, see our Houston foundation repair cost guide.
How foundation repair works with Texas Greatest Remodelers
- Inspection and Zip-Level mapping. We check the cracks, doors and floors inside and out, then use a Zip-Level Altimeter to map your floor elevation and show exactly where and how much the slab has dropped.
- A clear plan and the permit. What needs fixing, what it costs and what it takes. You see where every piling goes before we start, and we handle the city permitting and inspections.
- Pilings driven to refusal. Concrete pilings are driven with hydraulic pressure to the Depth of Refusal.
- Leveling the house. With the pilings in place, your home is lifted back toward level on its new supports and checked again against the elevation map.
- Hydrostatic plumbing test. After every lift, we test your sewer and water lines to make sure they are intact and leak-free. The test is included, not an extra cost.
- Walk-through, then you pay. You inspect. You confirm it's perfect. Then you pay.
A typical foundation leveling project spans five to ten business days from the first pilings being pressed to the final cleanout, depending on how much of the foundation needs support. With our $0 Down Payment policy, there are no deposits, no progress payments and no liens filed against your home. Every project is backed by our written Lifetime Transferable Warranty. See our foundation repair and leveling service for details.
Does homeowners insurance cover foundation repair?
Usually not for soil movement. The Texas Department of Insurance lists earth movement among the risks most home policies don't cover. The same guide says most policies cover a sudden and accidental release of water but not a continuous leak, and that some companies sell an endorsement covering damage to foundations or slabs. Coverages vary by company, so read your policy or ask your agent, and keep photos, the elevation map and any plumbing test results.
Questions to ask every foundation bidder
- Which method are you using, and why does it fit my house?
- How deep will the supports go, and how will you know they reached stable soil?
- How many supports, and where? Can I see the plan before work starts?
- Will you test the plumbing after the lift, and is that included?
- Who pulls the permit?
- Is the warranty in writing, what does it cover, and does it transfer if I sell?
- When do I pay?
Frequently asked questions
What is the best foundation repair method for Houston clay soil?
There is no single best method for every house. Deep supports such as pressed concrete pilings, drilled piers, steel pipe piles and helical piers aim to carry the house on soil below the active zone. Shallow lifts such as mudjacking and foam injection sit in the moving clay, so the slab can move again when soil moisture changes.
What is the difference between piers and pilings?
In Houston, "pilings" usually means precast concrete sections pressed into the ground with the weight of the house as resistance. "Drilled piers" are holes drilled and filled with reinforced concrete. Both aim to reach below the active zone, but they get their support differently.
Is foam or mudjacking enough to fix a sinking house?
Foam injection and mudjacking lift a slab by filling the space under it, but they are shallow repairs. The Foundation Performance Association notes that if the soil moisture changes, the slab can move again. They can be paired with deep supports rather than used on their own.
Can lifting a house damage the plumbing?
Lifting a house can stress old pipes. The ASCE Texas Section guidelines call for water and drain lines to be tested for leaks after a lift. We perform a Hydrostatic Plumbing Test after every lift, included in the job.
Does homeowners insurance cover foundation repair in Texas?
Usually not for earth movement or settling. The Texas Department of Insurance says most policies don't cover earth movement, though some companies offer an endorsement for damage to foundations or slabs. Damage from a sudden plumbing failure may be treated differently, so check your policy language with your agent.
Experience the Difference
Let us show you what a professional, transparent remodeling experience looks like.
